Categories
Contact Us

TEL:+86-755-23765496

E-mail:info@leomay.com

Add:No.3178,Renmin Road,Minzhi Street,Longhua District,Shenzhen City,Guangdong Province,China


News
Home > News > Content
DIY Fun Knight Indoor Ceiling Lamp Change LED
Mar 19, 2018

1. Use a screwdriver to pry open the main light transparent plastic cover

2. Pry open the plastic cover will find two black implementation, with a Phillips screwdriver twist, a little push forward, you can take off the ceiling lamp.

3. Take off the ceiling lamp bulb, put on the new joint, must try on the bright, not bright then the joint change.

4. After the test light, tear off the 3M plastic, affixed to the lamp shell.

5. Unplug the auxiliary lamp bulb, replace the same interface, the test light can be installed after the shell.

6. Installation of the lamp shell, the two convex twist into the corresponding hole, a little push backwards, screw, buckle on the main lamp shell, all OK.

Advantages: Led relative to save electricity, brightness is higher than the original bulb, the light bulb of their own economic benefits, but also realize the fun of their own hands. Disadvantage: Open the door, light or flashing, but lighter than the original flash, still do not know how much life.


  • Newsletter
  • Categories
  • Contact Us

    TEL:+86-755-23765496

    E-mail:info@leomay.com

    Add:No.3178,Renmin Road,Minzhi Street,Longhua District,Shenzhen City,Guangdong Province,China


  • QR Code
  • Copyright © Leomay Technology Company Limited All Rights Reserved.